“Funvas!” Work Procedure
●Things to prepare●
●Work processes●
①Set iron at medium temperature(approx.140℃)
※Do not use steam function.
②Press on hard and flat place. Lay out about 15sheets of newspaper for the pressing due to the workbench becoming hot.
※ Do not work on cushioning workbench because even pressure can not be given.
③Place the Funvas mark on your desired apparel item and heat-press with the iron. Apply pressure firmly and evenly and maintain for 10 seconds per Funvas mark. Press carefully around the corners and edges as they are prone to peeling off.
④After pressing entirely and letting it cool down, peel off the base film slowly.
⑤To increase durability, place the film that you removed in step④ back over the mark and iron once again. Press firmly for about 5seconds per area.
⑥Peel off the film and complete.
＜Note＞
●Be cautious not to get burn while working.
●Because Funvas mark use adhesive for fabric, it is impossible to press stacking marks.
●It tends not to stick well on the substrate having rough surfaces.
●Turn inside out and use a laundry-net when washing to make it last longer.
●After washing, to smoothen out wrinkles, iron putting Funvas mark film or release paper over mark.
●Funvas mark after press is unremovable, so please position it carefully.
●Depending on the material, any press-mark or fabric shrinkage may occur after heat-press. Please select the material carefully.
●Please understand that any warranty not compensation can not be given for any damage.